Dec 23, 2024 | Updated: 11:35 AM EDT

Installing Android 4.4 CM11 ROM On Galaxy Note 2 (N7100)

Nov 21, 2013 01:49 PM EST

The Paranoid Android team released an Android 4.4 KitKat ROM for the Galaxy Note 2 earlier this week and now the CyanogenMod team is out with a CM11 ROM for the phablet.

This guide will walk you though the installation process for CM11 on the Galaxy Note 2 bearing the model number N7100. As always, DroidReport assumes no liability for the firmware installation. Proceed with caution.

Before Getting Started

Do not use this guide for any device other than the Galaxy Note 2 (N7100 model). Flashing this ROM onto any other device will most probably result in a bricked phone.

You must have your Galaxy Note 2 rooted, with a recovery utility like ClockworkMod installed. As always, you want to backup your device and charge it to at least 80 percent.

Finally, enable USB Debugging mode by navigating to Settings -> Developer Options.

Updating Galaxy Note 2 to Android KitKat 4.4 via CM11 ROM

1) Download the Android 4.4 KitKat CM11 ROM, as well as the Google Apps package and CynoagenMod 10.2 Nightly, which can be found here, here and here.

2) Using your USB cable, connect your Galaxy Note 2 to your computer.

3) Copy CM11 custom ROM and the Google Apps package to the root folder of your handset’s SD card. Do not extract either.

4) Boot your phone into Recovery mode by pressing the Volume Up, Home and Power buttons simultaneously until you see a Galaxy Note 2 logo, then release all three to enter recovery mode.

5) Perform a factory reset by selecting “Wipe data/Factory reset.”

6) In CWM recovery, navigate to “Format system” in the Mounts and Storage submenu, and then press “Yes.” Next, navigate to the Advanced submenu and select “Wipe Dalvik Cache.” Select “Yes” when prompted.

7) Flash the CyanogenMod 10.2 Nightly file downloaded earlier by navigating to “Install Zip from SD card.” Repeat the same step to install the ROM file and Google Apps package.

8) After the installation is complete, press “Go back” and then select “Reboot system now” to restart your phone. This may take some time.

9) After restarting, your Galaxy Note 2 will officially be running Android 4.4 KitKat CM11 ROM. Kudos.

Real Time Analytics