Nov 21, 2013 11:04 AM EST
After a test version of Android 4.3 Jelly Bean (XXUEMK4) for the Galaxy Note 2 leaked yesterday, Google was quick to get the official build pushed out to device owners. This guide will walk you through how to manually flash the official Jelly Bean ROM onto your Note 2 (model number N7100).
As always, DroidReport assumes no liability for the firmware installation. Proceed with caution.
Before Getting Started
Before you get started, make sure that your Galaxy Note 2 is the factory unlocked GT-N7100 model.
As always, you want to backup your device since the firmware installation will likely wipe out all your data. Additionally, the installation will remove any custom ROM installed to your device.
Charge your Note 2 to at least 80 percent before proceeding.
Ensure that you have up-to-date USB drivers installed and connect your Galaxy Note 2 to your computer. Finally, enable USB Debugging mode by navigating to Settings -> Developer Options.
Updating Samsung Galaxy Note 2 (GT-N7100) to Android 4.3 Jelly Bean
1) Download and extract the official Android 4.3 firmware, which can be found here.
2) Download and extract Odin, which is available here.
3) Launch Odin.
4) Boot your Galaxy Note 2 into Download mode by pressing the Volume Down and Power buttons together until a warning prompt appears. Once you see the prompt, press Volume Up to enter download mode.
5) Right click on Odin and launch the application as an administrator.
6) Using Odin, install the following files from the .zip archive downloaded earlier:
A) Click PDA and select the .tar.md5 file.
B) Select Phone and navigate to the file with Modem in the file path.
C) Click CSC and select the file with CSC in the file path.
D) Click PIT and select the file with .pit in the file path.
7) Navigate to the Option submenu in Odin and check Auto Reboot and F.Reset Time. Uncheck Re-Partition.
8) Click Start and the installation will begin.
9) When the firmware has finished flashing to your Galaxy Note 2, your phone will automatically reboot.
10) Once your Galaxy Note 2 restarts, you will officially be running Android 4.3 Jelly Bean. Kudos.