Installing Android 4.3 CM10.2 ROM on Sony Xperia ZL By Staff Reporter | Nov 29, 2013 09:26 AM EST This guide will walk you though the installation process for CM10.2 on the Sony Xperia ZL. As always, DroidReport assumes no liability for the firmware installation. Proceed with caution.Before Getting StartedDo not use this guide for any device other than the Sony Xperia ZL. Flashing this ROM onto any other device will most probably result in a bricked phone.You must have your Sony Xperia ZL rooted, with a recovery utility like ClockworkMod installed. As always, you want to backup your device and charge it to at least 80 percent.Finally, enable USB Debugging mode by navigating to Settings -> Developer Options.Updating Sony Xperia ZL to Android Jelly Bean 4.3 via CM10.2 ROM1) Download the Android 4.3 Jelly Bean CM10.2 ROM, as well as the Google Apps package, which can be found here and here. 2) Using your USB cable, connect your Sony Xperia ZL to your computer.3) Copy CM10.2 custom ROM and the Google Apps package to the root folder of your handsetâs SD card. Do not extract either.4) Restart your phone into Recovery mode by tapping the Volume Up button while restarting the handset.5) Before a Nandroid backup of your device in case you need to restore to your previous firmware.6) In CWM recovery, navigate to âFormat systemâ in the Mounts and Storage submenu, and then press âYes.â Next, navigate to the Advanced submenu and select âWipe Dalvik Cache.â Select âYesâ when prompted.7) Navigate to âInstall Zip from SD cardâ and select the ROM file copied earlier. Repeat the same step to install the Google Apps package.8) After the installation is complete, press âGo backâ and then select âReboot system nowâ to restart your phone. This may take some time.9) After restarting, your Sony Xperia ZL will officially be running Android 4.3 Jelly Bean CM10.2 ROM. Kudos.